| This graph shows the value of all S.M.A.R.T attributes of drive hdb (HDS724040KLAT80). smartctl_exit_status is the return value of smartctl. A non-zero return value indicates an error, a potential error, or a fault on the drive. | |||||
| Field | Internal name | Type | Warn | Crit | |
|---|---|---|---|---|---|
| Spin_Retry_Count | Spin_Retry_Count | gauge | None | 060: |
|
| UDMA_CRC_Error_Count | UDMA_CRC_Error_Count | gauge | None | 000: | |
| Current_Pending_Sector | Current_Pending_Sector | gauge | None | 000: | |
| Power_Off_Retract_Count | Power_Off_Retract_Count | gauge | None | 050: |
|
| Seek_Error_Rate | Seek_Error_Rate | gauge | None | 067: |
|
| smartctl_exit_status | smartctl_exit_status | gauge | 1 | None | |
| Seek_Time_Performance | Seek_Time_Performance | gauge | None | 020: |
|
| Throughput_Performance | Throughput_Performance | gauge | None | 050: |
|
| Load_Cycle_Count | Load_Cycle_Count | gauge | None | 050: |
|
| Reallocated_Event_Count | Reallocated_Event_Count | gauge | None | 000: | |
| Reallocated_Sector_Ct | Reallocated_Sector_Ct | gauge | None | 005: |
|
| Start_Stop_Count | Start_Stop_Count | gauge | None | 000: | |
| Temperature_Celsius | Temperature_Celsius | gauge | None | 000: | |
| Raw_Read_Error_Rate | Raw_Read_Error_Rate | gauge | None | 016: |
|
| Spin_Up_Time | Spin_Up_Time | gauge | None | 034: |
|
| Offline_Uncorrectable | Offline_Uncorrectable | gauge | None | 000: | |
| Power_On_Hours | Power_On_Hours | gauge | None | 000: | |
| Power_Cycle_Count | Power_Cycle_Count | gauge | None | 000: | |